Tricity Bendix SG205/1WL Manual de usuario descargar pdf (Pagina 18)

18

ADVICE FOR SAFETY

Gas connections

• Before installation ensure gas type and

pressure and the pre-setting of the

appliance are consistent.

• This appliance must be installed only in

a room with good ventilation.

• This appliance must not connect to a

flu. It has to be installed and connected

in accordance with the rules in force.

Special attention should be paid to

ventilation requirements.

• The adjacent furniture panels have to

be heat resistant or protected by such

material.

• The gas type for this appliance is stated

on the rating plate.

Connection to gas supply.

Check that the gas flow and the diameter of

the supply pipe are sufficient to supply all

the appliances of the installation.

• Check that all connections are tight.

• Install an accessible and visible gas tap

to isolate the appliance.

- Installation of flues and ventilation

for gas appliances of rated input not

exceeding 60 kW (1

st

, 2

nd

and 3

rd

family

gases) – Part 2 Specification for

installation of ventilation for gas

appliances – BS 5440 Current editions;

- Gas burning appliances – Part 3

Domestic cooking appliances burning

gas – BS 5386 Current editions;

- Specification for installation of low

pressure gas pipe work of up to 20mm

(R1) in domestic premises (2

nd

family

gas) – BS 6891 Current editions;

Pipe threads for tubes and fittings where

pressure-tight joints are made on the

threads (metric dimensions) – BS 21

Current editions;

- Flexible hoses, end fittings and

sockets for gas burning appliances – BS

669 Current editions;

- Installation of domestic gas cooking

appliances (1

st

, 2

nd

and 3

rd

family gases) –

BS 6172: 1990 Current editions;

For appliances installed in the Republic

of Ireland please refer to NSAI-Domestic

Gas Installation IS813 Current editions.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Comentarios a estos manuales

Sin comentarios